50 Watt Bluetooth Transformer by RDI
What it is
The RDI 50 Watt Bluetooth Transformer is a low-voltage power supply that provides up to 50 watts of 12 V DC power for outdoor LED lighting systems like lighted post caps, under-rail lights, and other lighting accessories designed for RDI’s Quick Connect system.
Smart Features
- Bluetooth connectivity: Pair the transformer with RDI’s SmartPower50 smartphone app available on iOS and Android to control lights wirelessly — turn them on/off, dim, or adjust settings from your phone.
- Works with smart home: The system is reported to be compatible with Alexa and Google Home voice control.
Built-In Controls
- Photocell (daylight sensor): Automatically turns the lights on at dusk and off at dawn.
- Dimmer & Timer: Integrated controls let you set schedules and adjust brightness without extra accessories.
Electrical Specs and Setup
- Input: Standard household 110–120 VAC.
- Output: 12 V DC at ~5 A (50 W).
- Includes power cord and typically mounted in an accessible place near a GFCI outlet.
What It Powers
- This transformer serves as the central power hub for RDI low-voltage LED lighting systems — connecting multiple plug-and-play lighting components via quick-connect wiring without splicing.
About this product...
Transformer is 50W and can be used with lighted post tops or under-rail lighting. Includes photocell, built-in dimmer, and timer. Transformer is Bluetooth capable; "SmartPower50" app available in iTunes and Android store.
FEATURES:
- Lights
- Works with Alexa and Google Home
- Lifetime - Limited
- Yes
- RDI Quick connect lighting products
DETAILS:
- Input: 110-120Vac 1.5A 50/60Hz
- Output: 12Vdc 5A
- Power Cord ~ 6' - 5"
TRANSFORMER SET UP:
1. Mount the Transformer and Photocell. Use 4 zinc plated or stainless steel screws (not included) to mount the transformer a minimum of 12" above ground level and within reach of a 120V AC GFCI outlet. The 120V AC power cord attached to the transformer is 5' long. The transformer can be mounted under the deck, but the control panel should remain accessible in order to change the settings if needed. Plug the transformer into the GFCI outlet. Use a zinc plated or stainless steel screw (not included) to mount the photocell in a location that can sense dusk and dawn (night and day) conditions. The photocell cord is 5' long.
2. If the red light above the power button on the transformer’s control panel is illuminated, press the POWER button once to turn the transformer on (green light above power button indicates the transformer is powered on). Press the photocell OFF button (red light next to OFF button will be illuminated indicating photocell is off). This will force the transformer output to be on so that the LED lights will be illuminated during install.
