ALX Contemporary Cable Top Rail with Brackets
Clean, modern lines
What It Is
The ALX Contemporary Cable Top Rail with Brackets refers to the aluminum top rail section plus the hardware needed to attach it to deck posts in a Deckorators ALX Contemporary Cable Railing setup. It creates the finish line across the top of your railing, holding the cables in place and giving the system its sleek, modern look.
- It’s designed to pair specifically with Deckorators Contemporary Cable Railing posts and cable infill (sold separately).
- The rail and brackets are powder-coated aluminum for corrosion/UV resistance, suitable for decks, balconies, and other outdoor spaces.
- Works with both 36″ and 42″ height railing installations.
What’s Included
Top Rail Section (Line Rail)
- Aluminum top rail (rectangular profile) in lengths like 6 ft or 8 ft.
- Spacers with pre-drilled holes where cable runs through — helps keep cable spacing consistent and tensioned properly.
Brackets
- Rail brackets to secure the top rail to your aluminum posts. These come as part of the kit or can be purchased individually.
- Brackets match the railing finish.
Typical Components You Might Use Together
Here’s how the system pieces work together:
- Deckorators Contemporary Cable Top Rail Kit – Includes the aluminum rail, the cable spacer with pre-drilled holes, and two mounting brackets.
- ALX Contemporary Cable Continuous Top Rail Brackets – Individual continuous top rail brackets you can buy separately (handy for custom cuts or splices - sold separately)
- Aluminum Contemporary Cable Stair Top Rail Brackets – Stair-specific brackets to attach top rails on stair runs.
- ALX Cable Railing Level or Stair Bracket Kit and Level or Stair Rail Bracket for ALX Contemporary Cable Rail – Bracket sets that include connectors for level or stair sections, useful if you need extra hardware beyond the basic kit.
How It Works in Your Railing System
- Mount Your Posts: Set ALX Contemporary Cable posts at correct spacing (usually on 6′ or 8′ centers).
- Install Cable Infill: Run the stainless-steel cable through pre-drilled spacers in the top post.
- Attach the Top Rail: The top rail sits in between the posts, lining up with cable spacers.
- Secure With Brackets: Rail brackets bolt the top rail to the posts, providing structural support and matching the rail finish.
- Tension the Cables: Once the top rail is secure, you tension the cable runs to code-compliant spacing and rigidity.
DETAILS:
- Rectangular top rail profile for 36" or 42" rail heights
- 6' and 8' on-center lengths when installed using 2.5" posts
- Pre-drilled posts for 36" and 42" heights (not included)
- Includes one aluminum cable spacers (matches color of railing)
- 316 Stainless steel cable available in 5', 10', 15', 20', 25', 30', 40' and 50' lengths (sold separately)
- Posts and cable kits sold individually
- Available in Level or Stair
ACTUAL SIZES:
- 6' LEVEL ~ 68.5"
- 8' LEVEL ~ 92.5"
- 6' STAIR ~ 72"
- 8' STAIR ~ 96"
COLORS:
- Textured Black
- Textured White
- Textured Bronze
- Weathered Brown
TEXTURED BLACK
TEXTURED WHITE
BRONZE
WEATHERED BROWN
INCLUDES:
- Top Rail
- 2 ~ Brackets (plus hardware)
- Intermediate post (36" rail has 10 pre ~ drilled holes ~ 42" rail has 12 pre ~ drilled holes)
About this product...
Deckorators ALX Contemporary Cable Railing is a modern and stylish option for your deck or outdoor space. It features sleek and durable aluminum posts, top railings with brackets, and stainless steel cables for a clean and unobstructed view. The cable infill system is easy to install and requires minimal maintenance. The ALX Contemporary Cable Railing is available in textured black, textured white, weathered brown, and bronze finishes to complement any design aesthetic. It also comes with a limited lifetime warranty for peace of mind. Upgrade your deck with the Deckorators ALX Contemporary Cable Railing for a sleek and contemporary look.
Click HERE for installation:
Click HERE for cable packs:
Click HERE for Posts:
Click HERE for evaluation report:
Click HERE for Cable Railing Ordering Guide:
Achieve a clean, minimalist style, with the ALX Contemporary Cable railing. The railing has a beautiful powder-coated finish that resists scratches and corrosion and is backed by a lifetime limited warranty
How to install Deckorators cable railing
1. Choose A Top Rail
Deckorators offers Top Rail Kits for horizontal railings and stair railings. These kits are available in six-foot and eight-foot lengths, and that’s on-center post spacing. The Top Rail Kit comes with one or two cable spacers that are predrilled for cable, plus hardware. The spacer(s) is installed in the middle of the railing section and supports the cables. Note that you may need to trim the stair spacer(s).
Horizontal Top Rail Kits come in 36-inch and 42-inch heights. Stair Top Rail Kits come in a 42-inch height and the spacer(s) can be cut down to fit a 36-inch height.
PRO TIP: Because the Top Rail is six or eight feet on center, if you need to trim it, cut equal amounts from both ends. This is necessary because the rail is predrilled for the cable spacer(s).
2. Choose Your Posts
You will need one post for every Top Rail Kit you purchase, plus one. For example, if you buy four top rail kits, you will need five posts. If you buy seven top rail kits, you'll need eight. The number and type of posts you’ll need depends on your deck layout. Posts can accommodate 10 or 12 cables, depending on post height.
Posts are predrilled with holes for cables, so you don’t have to worry about aligning and drilling. The fittings that secure and keep the cables tight are hidden inside the posts, so your railing will look sleek.
Each post comes with a matching post cap and skirt. Note that if you wish, you can replace the post cap with a different Deckorators Aluminum Post Cap, sold separately.
- Posts can be trimmed with a miter or circular saw.
- You will need to purchase fasteners to secure posts to deck.
- There are five types of cable rail posts.
Line Post
This post is used between End or Corner posts. Cables run straight through this post.
Cables running through line posts and cable spacers
End Post
You will start and end a cable run with an End Post. You’ll need at least two End Posts, one at the beginning and one at the end of the particular cable run. You may need more, depending on your design. End posts are also used at the top of stairs.
Cable runs start and terminate at an End Post
Corner Post
Use this post when the cables need to turn more than 45°. The Corner Post has an insert that absorbs the weight of the cable tension. You’ll also get 2 threading needles to help thread the cables through the corner. You’ll only need one post per corner.
Stair Post
For stair railings, you will need special posts for the middle and end of the railing. Use a regular End Post at the top of the stair railing.
Stair Middle Post
This post is installed between the top and bottom posts. The predrilled holes on this post are elongated to align with the stair angle.
Stair End Post
You will need two Stair End Posts at the bottom of the stair railing (one per side). These posts are installed on the bottom stair riser. The holes are predrilled on both sides and are perpendicular to the post face and need to be oriented that way for the pull-lock fitting. Because the holes on the opposing side will need to align with your stair incline angle, you’ll need to drill these holes yourself.
3.Choose Your Cables
Deckorators Contemporary Cable Rail is sold in kits that contain a single cable plus fittings and the hardware you'll need to install it. Cable is sold in precut lengths and is available in 5, 10, 15, 20, 25, 30, 40, and 50 ft. lengths. The beauty of having precut lengths is that you'll waste less cable. You will need one Cable Hardware Kit per row. 36-inch posts will have 10 rows of cable. 42-inch posts will have 12 rows of cable.
Each Cable comes with a preattached threaded stud on one end. The Cable Hardware Kit also includes a swageless pull-lock fitting to tighten the cable, plastic spacer, stainless steel washer, brass locknut and cap. These parts are hidden inside the post once installed. The cap is used on the outside of an End Post to cover the trimmed end of cable.
Each Cable Kit comes with a stainless-steel button to cover the trimmed cable end
Helpful To Have:
- Mandrel & Cut Off Wheel Pack - The wheel attaches to your drill and lets you cut cable flush without damaging the post and will ensure that the trim cap fits snugly.
- Cable Release Key - If you If you make a mistake (it happens!) and need to release the cable tension, you need this Key.
Installation Tips:
- Don't use rusty tools. They can leave carbon deposits on the surface of fittings that can rust and discolor your railing. Manufacturer recommends using new chrome-plated tools.
- Clean well after installation. Clean the entire railing after it’s installed. Remove carbon deposits from the surface of stainless-steel parts by cleaning them completely with a stainless-steel cleaner and a soft cloth.
