Aurora Remote control Dimmer
What it is:
A low-voltage remote dimmer controller designed for use with Aurora deck lighting systems. It sits between your 12 V DC transformer and your LED lights and lets you control brightness and on/off functions with a handheld RF remote.
Key features:
- Remote control included — wireless RF remote to turn lights on/off and dim them.
- Dimming capability — adjusts LED brightness in steps and micro-adjusts between levels.
- Works with Aurora DC lighting systems — designed for use with Aurora transformers and compatible LED lights.
- Remote range — typically around ~30-40 ft for control from a distance.
- Weather-resistant housing — suitable for outdoor installation near decks and walkways.
- Easy installation — installs inline on the low-voltage wiring, after the transformer output.
- 1-year limited warranty from the manufacturer.
How it works:
- Connect your Aurora LED lights to the dimmer module after the transformer.
- Use the remote’s buttons to turn lights on/off and adjust brightness.
- The Mode button cycles preset brightness levels (e.g., 100%, 70%, 35%, 5%), and up/down buttons let you fine-tune between levels.
About this product...
RF dimmer is a controller that can adjust light to the appropriate lighting brightness incrementally.
Description:
The Aurora Deck Lighting DC Remote Dimmer is compatible with the Aurora Phoenix LED Lighting. The dimmer is installed after the transformer 12 volt output line.
Features:
- Compatible with Aurora Phoenix LED Lights
- Remote included. The remote is sold with the Phoenix lighting kit
Installation Instructions:
Once all of the LED Deck lights have been connected to the wire, connect the male end of the twisted wire pigtail to the Remote Driver Box. Connect the Remote Control Driver wires to the end of the twisted wire using two connectors. The black wire must be connected to the positive wire lead as noted on the transformer, and the white wire must be connected to the negative wire. See Figure #1.
Operating Instructions:
There are 4 buttons on your remote control:
- M = Mode button – allows for quick click adjustment
- /\ = Micro adjust UP – Press and hold
- \/ = Micro adjust DOWN – press and hold
- = On/Off button
