Country Ledgestone Column Wrap by Nextstone
DETAILS:
-
5 faux stone colors to choose from: andean onyx, appalachian gray, himalayan brown, teton buff, and dover white
*some colors may have a longer lead time
-
Material: composite polyurethane, reinforced with recycled PVC
-
Size: 16” (length) 16” (width) x 30” (height)
-
Comes in four attachable pieces
Click HERE for two-piece sister product
Click HERE for stone post cap options
WHAT’S INCLUDED:
MORE DETAILS:
-
Low maintenance
-
The look and feel of masonry
-
Lightweight and easy to cut and modify
-
Mixed with fire retardants and UV inhibitors ~ protection against harsh climates / environmental disasters
About this product…
Post Columns, like post covers, are used to cover existing posts that you may have on your deck, in your yard, or around your home. If you’re looking to update a space or make your home feel more in line with your desired aesthetics, post columns are a cost-effective and easeful solution, not requiring you to remove previously installed posts.
Along with being cost and time effective, these Country Ledgestone Column Wraps by Nextstone offer an entrance into an upscale, durable, and earthy outdoor model. These statement pieces give your home a big personality, and are surely elevating. If you’re seeking an upgrade using stone on your decking without having to employ a mason, these pieces offer you the aesthetics and materials that you’re looking for without the long-term commitment of concrete. Striking, bold, and cast from actual stone and rock formations, these covers have the look and feel of true masonry. Created with an impact-resistant polyurethane material that protects against mildew, UV rays, and moisture damage, these covers can withstand all kinds of weather.
This four-piece wrap can connect around posts, making installation possible if unable to slip over the top. These stone column wraps coordinate perfectly with vinyl, composite, and wood materials, whether for deck rails, wood deck columns, or fence posts. Weighing about 1 lb. per square foot, these lightweight panels make installation easily manageable, removing the need to pay for additional materials, equipment or labor.
Simply wrap the column wraps around any unsightly, weathered, or worn down posts, and you’ll notice an instant sense of accomplishment in making your home look welcoming and refreshed. They may also be used to enhance indoor areas such as load bearing basement columns.
Click HERE to complete your look with post caps
Stone Column Wrap Installation Instructions:
Simply follow the installation instructions provided in your order. Any questions with installation, please call 866-371-8232
Click HERE for FAQ:
*20 year warranty
Still have questions or need advice on ordering the right supplies for your project? Get in touch with Deck Expressions’ 24/7 customer service. We’re always ready to help.
FAQ:
What is NextStone made of?
- NextStone™ is made of a composite Polyurethane, reinforced with recycled PVC for durability. It is mixed with UV inhibitors and fire retardants. All panels and accessories are created with a proprietary in-mold coating to prevent fading, then hand painted with an exterior durable paint.
Can the Panels and Accessories be cut?
- Absolutely! Panels and accessories are very easily cut with any standard saw you would use on wood.
INSTALLATION:
Follow the directions below to start installing your new New Country 30″ Column Wrap. If you have any questions please submit us a request for more information using our instant answer pop-up.
1) Fir out the desired column to 13ā
” x 13ā
”
Figures 1-3
2) Each box contains 4 PIECES, MARKED 1-4.
Place the first panel (# 1) against the firred out column. Make sure to place all panels with the top arrow pointing up. Slide in panel #2 and #3 on the right and left side( as you are facing panel #1). This will center panel #1 over the enclosure.( Fig. 1) After “dry fitting” the side panels, attach the bottom of panel #1 about 1” from the bottom using (3) 2” exterior screws. (Fig. 2) Place the screws in the grout lines to best hide screw heads and minimize touch up work (Fig. 2). For additional stability, place screws in the grout line about 15 1/2” from the base. This screws through the inner landing of the panel. (Fig. 3) Then screw the hem where indicated.
Figures 4 – 6
3) Next, seat the side pieces, (# 2 and #3) into the tab interlock of panel #1 and check for tightness of joints.
(Fig. 4)Facing panel 1, panel 2 is on the right side, and panel 3 is on the left side. Make sure to place all panels with the top arrow pointing up.
Attach the side panels using the same procedure as described for panel #1.
4) Attach panel number 4 at the base, then slide into panels #2 and #3.
Make sure joints are tight, then secure as described above. (Fig. 5)
5) To make columns higher than 30”, simply stack the next course using the ship lap at the bottom.
Screw across the bottom in the grout line, and the screw hem at the top. (Fig. 6)
The Sandstone 18″ Cap is designed to fit over the Slatestone Column if the top course of corners either ends with the screw hems attached or with the screw hems removed.
Screw Attachment:
Drive one screw per side through the bottom lip of the cap all the way into the substrate. Be Careful to angle the Screws so they don’t run through the top of the cap. Do not overdrive screws.
Adhesive Attachments
1) If the top course ends with the screw hem attached:
Place adhesive in each corner of the cap and secure. (Fig. 1).
2) If the top course of corners has the screw hems cut off, face screw each piece 1” from the top so that the cap covers the screw heads. Place adhesive on inside
cutouts as shown (Fig. 2).
Using Adhesive Versus Screwing to fixture.
Original Ownerās 20-Year Limited Liability Warrant: #
NextStone rock-face paneling and accessories are manufactured using quality raw materials and are produced with engineering excellence designed for years of maintenance free use. NextStone warrants exclusively the original Purchaser of the NextStone Product beginning with the original date of purchase of the product for a period of 20 years thereafter. If the original property to which the NextStone product was applied is sold within the Twenty Year Warranty timeframe, the product will no longer be covered through this Warranty and NextStone will not be liable for further replacements, repairs and /or any other type of compensation related to this purchase.
