Low Voltage Transformers by Deckorators
Transformers works with all Deckorators low voltage lighting.The Deckorators transformer is available in 12 W or 50W and can be used with lighted post tops or under-rail lighting. Includes photocell, built-in dimmer, timer, and remote. The 50W Transformer is Bluetooth capable; "SmartPower50" app available in iTunes and Android store.
- Input: 110-120Vac 1.5A 50/60Hz
- Output: 12Vdc 5A
- Power Cord ~ 6' - 5"
50 Watt TRANSFORMER SET UP:
1. Mount the Transformer and Photocell. Use 4 zinc plated or stainless steel screws (not included) to mount the transformer a minimum of 12" above ground level and within reach of a 120V AC GFCI outlet. The 120V AC power cord attached to the transformer is 5' long. The transformer can be mounted under the deck, but the control panel should remain accessible in order to change the settings if needed. Plug the transformer into the GFCI outlet. Use a zinc plated or stainless steel screw (not included) to mount the photocell in a location that can sense dusk and dawn (night and day) conditions. The photocell cord is 5' long.
2. If the red light above the power button on the transformer’s control panel is illuminated, press the POWER button once to turn the transformer on (green light above power button indicates the transformer is powered on). Press the photocell OFF button (red light next to OFF button will be illuminated indicating photocell is off). This will force the transformer output to be on so that the LED lights will be illuminated during install.
- 12 watt DC
- 50 watt DC
Click HERE for 12 watt DC Installation:
Click HERE for 50 watt DC Installation:
Click HERE for Smart Transformer Installation: