Next Stone SlateStone Column Wrap by Nextstone

Next Stone

SlateStone Wide Column Wrap by Nextstone

$155.99
UPC:
878138003701
Availability:
Usually ships 1-3 days if available
Adding to cartā€¦ The item has been added
Contractor Rebates

Slate Stone Faux Stone Column Wrap by NextStone

* Note ~ Some styles may be delayed

Decorative column wrap features a 4 - piece design to fit around existing posts. Made from high density expanded polyurethane. Light weight, strong and durable. Column wraps are stackable and trim-able to achieve any height. Column Wraps are designed to maintain the appearance of elegant stone columns while remaining easy to install and maintenance free.

MEASUREMENTS:

  • Height - 30"
  • Width - 16" x 16"
  • Inside Dimension ~ 13-7/8" x 13-7/8"

STYLES:

  • Rundle Ridge
  • Brunswick Brown
  • Sahara
  • Midnight Ash 
  • Onyx
  • Pewter

What is NextStone made of?

NextStone™ is made of a composite Polyurethane, reinforced with recycled PVC for durability. It is mixed with UV inhibitors and fire retardants. All panels and accessories are created with a proprietary in-mold coating to prevent fading, then hand painted with an exterior durable paint.

Click HERE for installation:

Click HERE to see our FAQ Page for more information: Post Caps NOT included 

Click HERE for Post Cap Options:

FAQ:

What is NextStone made of?

  • NextStone™ is made of a composite Polyurethane, reinforced with recycled PVC for durability. It is mixed with UV inhibitors and fire retardants. All panels and accessories are created with a proprietary in-mold coating to prevent fading, then hand painted with an exterior durable paint.

Can the Panels and Accessories be cut?

  • Absolutely! Panels and accessories are very easily cut with any standard saw you would use on wood. 

INSTALLATION:

  • 1) Fir out the desired column to 13ā…ž" x 13ā…ž" .
  • 2) Each box contains 4 PIECES, MARKED 1-4.
  • 3) Next, seat the side pieces, (# 2 and #3) into the tab interlock of panel #1 and check for tightness of joints.
  • 4) Attach panel number 4 at the base, then slide into panels #2 and #3.
  • 5) To make columns higher than 30”, simply stack the next course using the ship lap at the bottom.
  • The Sandstone 18" Cap is designed to fit over the Slatestone Column if the top course of corners either ends with the screw hems attached or with the screw hems removed.
    • Screw Attachment:
    • Adhesive Attachments

Follow the directions below to start installing your new Slatestone 30″ Column Wrap. If you have any questions please submit us a request for more information using our instant answer pop-up.

1) Fir out the desired column to 13ā…ž” x 13ā…ž”

Figures 1-3

2) Each box contains 4 PIECES, MARKED 1-4.

Place the first panel (# 1) against the firred out column. Make sure to place all panels with the top arrow pointing up. Slide in panel #2 and #3 on the right and left side( as you are facing panel #1). This will center panel #1 over the enclosure.( Fig. 1) After “dry fitting” the side panels, attach the bottom of panel #1 about 1” from the bottom using (3) 2” exterior screws. (Fig. 2) Place the screws in the grout lines to best hide screw heads and minimize touch up work (Fig. 2). For additional stability, place screws in the grout line about 15 1/2” from the base. This screws through the inner landing of the panel. (Fig. 3) Then screw the hem where indicated.

Figures 4 – 6

3) Next, seat the side pieces, (# 2 and #3) into the tab interlock of panel #1 and check for tightness of joints.

(Fig. 4)Facing panel 1, panel 2 is on the right side, and panel 3 is on the left side. Make sure to place all panels with the top arrow pointing up.

Attach the side panels using the same procedure as described for panel #1.

4) Attach panel number 4 at the base, then slide into panels #2 and #3.

Make sure joints are tight, then secure as described above. (Fig. 5)

5) To make columns higher than 30”, simply stack the next course using the ship lap at the bottom.

Screw across the bottom in the grout line, and the screw hem at the top. (Fig. 6)

The Sandstone 18″ Cap is designed to fit over the Slatestone Column if the top course of corners either ends with the screw hems attached or with the screw hems removed.

Screw Attachment:

Drive one screw per side through the bottom lip of the cap all the way into the substrate. Be Careful to angle the Screws so they don’t run through the top of the cap. Do not overdrive screws.

Adhesive Attachments

1) If the top course ends with the screw hem attached:
Place adhesive in each corner of the cap and secure. (Fig. 1).
2) If the top course of corners has the screw hems cut off, face screw each piece 1” from the top so that the cap covers the screw heads. Place adhesive on inside
cutouts as shown (Fig. 2).

Using Adhesive Versus Screwing to fixture.
Original Ownerā€™s 20-Year Limited Liability Warrant: # NextStone rock-face paneling and accessories are manufactured using quality raw materials and are produced with engineering excellence designed for years of maintenance free use. NextStone warrants exclusively the original Purchaser of the NextStone Product beginning with the original date of purchase of the product for a period of 20 years thereafter. If the original property to which the NextStone product was applied is sold within the Twenty Year Warranty timeframe, the product will no longer be covered through this Warranty and NextStone will not be liable for further replacements, repairs and /or any other type of compensation related to this purchase.

Related Products

Customers Also Viewed

!